Skip to content
Ontario Window Replacement

Ontario Entry Doors Residential & Commercial

Entry Doors in Ontario, CA

Ontario Window Replacement provides professional entry doors in Ontario, CA for residential and commercial properties across the West End of the Inland Empire. The front door of a house and the front door of a business have the same job and almost nothing else in common. One is chosen for how it looks and how tightly it seals. The other is regulated in nearly every dimension it has.

Take the house first. A residential entry is a slab or a prehung unit in fiberglass, steel or wood, and in Ontario fiberglass wins most arguments. A west-facing wood door in this climate moves, checks and needs refinishing on a schedule people do not keep. A fiberglass slab with a molded grain holds its finish, does not warp against an afternoon that hits triple digits, and takes a decorative glass insert without any of the maintenance.

Prehung versus slab is the real decision and it is about the jamb. If your existing jamb is square, sound and correctly flashed, a slab is far less work and less money. If the jamb has moved, the threshold has rotted, or the door never sealed at the top corner, a prehung unit with a new sill is the honest fix. We say which one you have after a level goes on it.

Glass changes the code picture even at a house. Sidelites and full-glass doors mean safety glazing, and the panel next to a door has specific requirements. If you have an unlabeled pane in a sidelite, it was replaced by somebody who did not know that, and it should be corrected.

Commercially this is a different trade with a different vocabulary. A public entrance is a narrow, medium or wide stile aluminum door with a ten inch bottom rail, hung on offset pivots, butt hinges or a continuous hinge, with a closer set to an opening force the code fixes and hardware determined by the occupancy. If the door serves as an exit for enough people, it needs panic hardware and it must swing in the direction of travel.

None of that is negotiable and none of it is priced like a house. A commercial entrance is quoted as framing, door leaf, glass, and hardware as separate lines, and the hardware line can exceed the door. Add a card reader, an electric strike or an automatic operator and the job pulls in an electrician and a different inspection. We tell you that at the walkthrough, because it is the part that moves the schedule.

Accessibility is the piece business owners are most often blindsided by. Threshold height, clear width, maneuvering clearance on both sides and the force needed to open all have numbers attached, and if the work is significant enough, upgrading the path of travel can come with it. We are glaziers, not plan checkers, but we know when to tell you to get a design professional involved before ordering.

The warranty split is stark and worth stating. A residential entry door carries consumer terms measured against normal household use. A commercial entrance carries a much shorter term precisely because it is going to swing hundreds of times a day, and no manufacturer will pretend otherwise. Anyone quoting you a lifetime warranty on a storefront door has printed the wrong document.

Our licensed and insured team brings the right materials and equipment to every job — center-set aluminum storefront framing in 1-3/4 by 4-1/2 inch profiles, dry-glazed EPDM gaskets and wet-glazed structural silicone joints, subsill flashing with end dams under storefront base members, tempered and heat-strengthened lites carrying CPSC 16 CFR 1201 labels, aluminum entrance doors with the 10 inch ADA bottom rail, offset pivots, top jamb closers and concealed vertical rod exit devices — and backs the work with a written workmanship warranty. We serve Ontario and nearby communities including Chino, Chino Hills, Montclair, Upland.

What We Handle

Everything our entry doors in Ontario covers

One crew, one point of contact, and the full range of entry doors work in Ontario, CA. If it is on this list we do it in house rather than handing it to a subcontractor:

  • entry door replacement Ontario CA
  • fiberglass front door Ontario
  • front door with sidelites Ontario CA
  • steel entry door Ontario replacement
  • door slab vs prehung Ontario
  • entry door glass insert Ontario CA
  • front door weatherstrip Ontario
  • entry door cost Ontario CA
  • commercial aluminum entrance door Ontario
  • panic hardware entrance door Ontario CA
  • ADA bottom rail door Ontario
  • entry door install Ontario California

Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Ontario services.

Materials, equipment and how we do entry doors

The difference between entry doors that lasts and entry doors that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with center-set aluminum storefront framing in 1-3/4 by 4-1/2 inch profiles, dry-glazed EPDM gaskets and wet-glazed structural silicone joints, subsill flashing with end dams under storefront base members, tempered and heat-strengthened lites carrying CPSC 16 CFR 1201 labels, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.

Every Ontario job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in the West End of the Inland Empire means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.

Where we do entry doors outside Ontario

Ontario Window Replacement covers Ontario and the surrounding communities of the West End of the Inland Empire. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.

  • Entry Doors in Chino, CA San Bernardino County, incorporated in 1910, population 91,403 at the 2020 census, with dairy-preserve land on the south side turning over to distribution buildings
  • Entry Doors in Chino Hills, CA San Bernardino County, incorporated in 1991, population 78,411 at the 2020 census, almost entirely built after 1980 and overwhelmingly residential
  • Entry Doors in Montclair, CA San Bernardino County, incorporated in 1956, population 37,865 at the 2020 census, in a five and a half square mile footprint dominated by retail frontage
  • Entry Doors in Upland, CA San Bernardino County, incorporated in 1906, population 79,040 at the 2020 census, with a pre-war downtown core and hillside tracts above Foothill Boulevard
  • Entry Doors in Pomona, CA Los Angeles County, incorporated in 1888, population 151,713 at the 2020 census, the largest city in the Pomona Valley and the oldest housing stock we cover
  • Entry Doors in Claremont, CA Los Angeles County, incorporated in 1907, population 37,266 at the 2020 census, with a walkable village core and a large protected residential historic district

Start on the Ontario Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.

Why Ontario Chooses Ontario Window Replacement

  • Two estimating methods, and the quote says which one you are reading. Residential is per opening. Commercial is glazed square foot plus framing linear foot, with the after-hours premium shown on its own line instead of buried in a unit price.
  • We hold the CSLB C-17 glazing classification, the one that covers commercial glass. A great deal of residential window work in this region is sold by outfits that cannot legally glaze your storefront, and they rarely volunteer that.
  • Warranty documents are never merged. A house gets the manufacturer's residential terms. A commercial opening gets the commercial terms, which are shorter, and we would rather explain why now than have you find out in year eleven.
  • Permit path stated before you sign. Residential retrofit is usually over the counter. Commercial can mean plan check, an accessibility review of the path of travel, and an inspection sequence that quietly decides your schedule.

The standards behind entry doors

Quality here is not a matter of opinion — it is written down. The entry doors work we do in Ontario follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.

Every entry doors project in Ontario gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.

Ready to get started? Call (844) 511-2320 for a free entry doors free estimate in Ontario, or request a quote and we'll get right back to you.

Related Services

Entry Doors in Ontario: Common Questions

How much does entry doors cost in Ontario, CA?

It comes down to square footage, access, the condition of what is already there, and the materials you choose — center-set aluminum storefront framing in 1-3/4 by 4-1/2 inch profiles, dry-glazed EPDM gaskets and wet-glazed structural silicone joints, subsill flashing with end dams under storefront base members. We do not price a job off a phone call and a guess.

We measure on site and hand you an itemized free estimate with the scope written out, so you can compare it line by line against anyone else's number.

How long does a entry doors job take?

Most residential entry doors work in Ontario runs from a single day to about a week once materials are on site. Larger commercial jobs get phased so the property keeps operating. Weather, permit review and material lead times are the usual reasons a date moves, and you hear about those from us before the crew starts, not after.

Do you pull permits and handle inspections in Ontario?

Yes, on any work that needs one. We file with the Ontario building department, schedule the inspection and stay on site for it. Skipping a permit is how property owners end up paying twice — once for the work, and again when it fails at resale or an insurance claim.

Is Ontario Window Replacement licensed and insured?

Licensed California contractor holding the CSLB C-17 glazing classification, the classification that covers cutting, assembling and installing glass in dwellings and in commercial structures alike. General liability and workers compensation in force, plus the $25,000 contractor's license bond every California licensee has been required to carry since Senate Bill 607 took effect on January 1, 2023.

Storefront and entrance work detailed to the aluminum manufacturer's published shop drawings, so the framing warranty stays intact and the finish warranty is not voided by a field modification. Every entry doors job carries Two warranty documents, never merged: one on our labor, and the manufacturer's own on the frame, the sealed glass unit and the hardware.

Residential and commercial products carry different manufacturer terms and we print both. Ask any contractor for those four things in writing before you sign — the ones who hesitate are telling you something.

Do you take commercial window work as well as residential?

Both. Ontario Window Replacement runs residential entry doors across Ontario neighborhoods and commercial work for offices, retail, restaurants, apartment complexes and HOA properties throughout the West End of the Inland Empire. Commercial jobs get phased scheduling and off-hours crews so tenants and customers are not shut out while the work happens.

Call Now